Omicron Archives - ICS Group Innovation through Efficiency

Omicron Votano 100

alan-talkdig — Fri, 28 Apr 2023 02:46:07 +0000

The VOTANO 100 is a groundbreaking portable device weighing just 15 kg (33 lbs), designed to deliver highly precise voltage transformer testing. This versatile tool can be used for electrical performance assessments, class verification, and calibration.

Capable of conducting swift tests on a variety of inductive voltage transformers (VTs) and capacitive voltage transformers (CVTs) for both protective and metering functions, its lightweight design is perfect for on-site testing and calibration tasks within power system grids. Manufacturers and testing laboratories can also benefit from employing the VOTANO 100 in their production facilities and research/development labs.

The VBO2 voltage booster supplies the necessary test voltage during ratio measurement, while its integrated switchbox seamlessly transitions between required test sequences.

The post Omicron Votano 100 appeared first on ICS Group Innovation through Efficiency.

Omicron CP TD1

alan-talkdig — Sun, 12 Mar 2023 07:02:27 +0000

Capacitance/Dissipation Factor Testing

The post Omicron CP TD1 appeared first on ICS Group Innovation through Efficiency.

Omicron CP SB1

alan-talkdig — Sun, 12 Mar 2023 07:01:05 +0000

The CP SB1 is an accessory for the CPC 100 and simplifies measurement of three-phase power transformers.

The switchbox CP SB1 reduces wiring work at power transformers. Thereby, the time needed for testing can be reduced and, at the same time, safety can be significantly increased.

The transformer ratio and winding resistance are automatically measured in all three phases (in sequence) in all tap changer positions. The measurement results are recorded by the CPC 100 and can be analysed with the accompanying software package.

The post Omicron CP SB1 appeared first on ICS Group Innovation through Efficiency.

Omicron CP CB2

alan-talkdig — Sun, 12 Mar 2023 06:46:29 +0000

The output current of the CPC 100 can be increased up to 2000 A using the CP CB2 current amplifier. The CP CB2 is connected to the busbars via a short, high-current cable, and to the CPC 100 via the long control cable.

The post Omicron CP CB2 appeared first on ICS Group Innovation through Efficiency.

Omicron CT Analyser

alan-talkdig — Sun, 12 Mar 2023 06:44:15 +0000

Current Transformer Testing and Calibration

The post Omicron CT Analyser appeared first on ICS Group Innovation through Efficiency.

Omicron ARC 256X

alan-talkdig — Sun, 12 Mar 2023 06:42:38 +0000

Arc flash protection systems are designed to detect arcs which occur during short-circuits in switchgear and to minimize the potential hazard to personnel and equipment by reducing the time of occurrence and disrupting the flow of energy feeding the arc flash.

For testing such systems, the ARC 256x Arc Flash Initiator simulates an arc by a xenon tube, very similar to a camera flash. This CMC accessory is positioned close to the arc flash sensor during testing. Via its 6 m (19.7 ft) long connection cable it is connected to the external interface socket of the CMC test set, which provides both the supply voltage as well as the signal that will trigger the flash.

The post Omicron ARC 256X appeared first on ICS Group Innovation through Efficiency.

Omicron CMC356

alan-talkdig — Sun, 12 Mar 2023 06:40:13 +0000

The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high power demands.

The CMC 356 is the first choice for applications requiring the highest versatility, amplitude and power. Commissioning engineers will particularly appreciate its ability to perform wiring and plausibility checks of current transformers, by using primary injection of high currents from the test set.

The post Omicron CMC356 appeared first on ICS Group Innovation through Efficiency.

Omicron CPC100

alan-talkdig — Sun, 12 Mar 2023 06:38:49 +0000

The patented CPC 100 primary injection test system replaces several individual testing devices. This reduces the costs for training and transport, and cuts down testing time. Therefore, the CPC 100 is the ideal test set for substation asset commissioning and maintenance. You can operate the CPC 100 via the integrated front panel, or by using the Primary Test ManagerTM (PTM) software on your laptop.

The post Omicron CPC100 appeared first on ICS Group Innovation through Efficiency.